EN
day--night-honeycomb-blinds--dual-layer-cellular-shades, day--night-honeycomb-blinds--dual-layer-cellular-shades, /honeycomb-blinds
EN
EN
• Two layers, one headrail. A light-filtering front panel and a room-darkening rear panel share a single rail, so one window can change character between a working morning and a sleeping night.
• Rails that travel apart. The upper and lower rails are driven independently, which lets the open band sit wherever the room needs it.
• Cells that hold still air. The creased honeycomb pocket traps a cushion of motionless air against the glass and slows heat exchange.
• No cord in the room. A push-pull mechanism replaces the cord loop, keeping the window clear and simple to handle.
• Cut to your opening. Each panel is produced to your own width and drop in our workshop and can be fitted inside the reveal or across the face of the wall.
A day and night shade answers a familiar brief: the same window has to read as open and airy at noon and as a quiet, dimmed surface after dark. Two fabric layers stacked in one headrail cover both cases. Daylight is filtered through the front panel while the rear panel stays gathered near the upper rail; in the evening the rear panel drops and the room settles into a lower light level. Interior designers call for this format in guest rooms, where a single elevation has to serve an afternoon of work and a night of rest.
The panels are built from non-woven polyester, creased into honeycomb cells that give the fabric its body and its air pocket. Buyers can take a light-filtering face, a room-darkening face, or a pairing of the two; the room-darkening version carries an aluminium foil liner that dims a room without sealing it shut. Movement is by cord-free push-pull, by independent upper and lower rails, or by a tubular motor with a handset. Fixing is either recessed inside the reveal or surface-mounted, and the fabric lifts clean with a dry cloth.
The Day & Night Honeycomb Blinds are a dual-layer window solution built for interiors that need flexible light control across the whole day. As honeycomb blinds from Dongguan MSJ Blinds Co., Ltd., these dual-layer shades combine a sheer day layer with a dimming night layer. These cellular shades give designers smooth transitions from bright daylight to full privacy. Whether you need honeycomb blinds for a hotel guestroom or dual-layer shades for a residential project, they deliver. Cellular shades continue to evolve, and these honeycomb blinds lead the way. Suppliers watching cellular shades will find these dual-layer shades a smart addition. They also fit any cellular shades specification well. As dual-layer shades, these honeycomb blinds prove that cellular shades and day-to-night flexibility can coexist.
Dongguan MSJ Blinds Co., Ltd. is a window blinds supplier with over 18 years of experience. Our work covers the design, development, and production of traditional and intelligent blinds and shutters. Every set of honeycomb blinds meets consistent standards. Our dual-layer shades are produced in a 100,000+ square meter facility with Intertek-certified quality management. As cellular shades specifications shift, our honeycomb blinds stay relevant. These dual-layer shades also pair well with any cellular shades program. For buyers seeking honeycomb blinds, these dual-layer shades are a strong choice.
These honeycomb blinds offer strong features. The dual-layer design combines a translucent day layer with a blackout night layer. These dual-layer shades adjust with a single cordless control. The cellular shades allow made-to-measure sizing for irregular windows. As cellular shades demand grows, these honeycomb blinds use durable fabrics. These dual-layer shades hold their pleat through repeated use. They also resist fading, matching modern cellular shades requirements. For fans of dual-layer shades, these honeycomb blinds are a natural fit.
| Product type | Day and night honeycomb blinds (dual-layer cellular shades) |
| Fabric | Non-woven polyester, creased into a honeycomb cell |
| Layer set-up | Light-filtering front panel plus room-darkening rear panel |
| Shading | Light-filtering, or room-darkening with an aluminium foil liner |
| Cell | Honeycomb pocket forming a still-air layer at the glass |
| Operation | Cord-free push-pull; upper and lower rails move independently |
| Motor option | Tubular motor with a remote handset |
| Mounting | Recessed inside the reveal or face-fixed to the wall |
| Colour range | Five coordinated colourways from warm neutrals to deep tones |
| Suited to | Bedrooms, children's rooms, guest rooms, studies, sun rooms |
| Order basis | Made to measure, quantities agreed per project |
• Two moods from one window. A specifier no longer has to choose between a bright daytime room and a night-time sleeping environment, because both settings live in the same piece of hardware.
• Dimming at the height you choose. The rear panel can be drawn to whatever point the occupant prefers, so glare on a screen or a bedside lamp is handled without shutting out daylight altogether.
• A softer edge at the glass. The still-air cell slows the movement of warmth through the window, taking some pressure off heating in winter and cooling in summer.
• Calmer room acoustics. The layered structure absorbs a share of room noise, which is welcome in bedrooms that face a road or a corridor.
• Colour that holds. The polyester face resists fading under strong sun, and the cell walls spring back after handling so the pleats keep their line.
• Easy upkeep. Dust lifts off with a soft brush or a vacuum tool; there is no cord to re-thread and no fabric to send to a laundry.
• Bedrooms and children's rooms, where the night setting has to sit dim enough for sleep and the day setting has to keep the room usable.
• Living rooms with full-height glazing, where one shade manages glare at eye level and privacy after dark.
• Hotel guest rooms, where a single elevation serves an afternoon of work and a night of rest.
• Studies and home cinema corners, where daylight is wanted for reading and near-darkness is wanted for film.
• Sun rooms and bay windows, where the cell layer tempers strong afternoon sun without closing off the view.
We build each shade to the measurement and light level you send us. Width, drop, rail finish, fabric face and mounting method are all open to specification, and motorized versions can be matched to the control format already used on your site. Five coordinated colourways run from warm neutrals through to deep tones, which makes it practical to furnish several rooms from one palette.
For trade customers we run OEM and ODM programmes: your own label, packaging and carton marks, or a fabric and hardware combination developed from a written brief. Our team can work from drawings or from a physical sample you post to us, and an approval sample is produced before bulk production begins so that both sides agree on the result on the bench.
Our Dongguan factory has handled window-covering production for 18 years and now works from a 100,000+ m2 base. Runs are made to measure in house, so cutting, creasing, lining and assembly of your panels happen under one roof rather than across a chain of subcontractors. Quality is checked at four stages of the run, and buyers are welcome to attend inspection on site before packing if they want to watch their order on the line.
• Two layers, one headrail. A light-filtering front panel and a room-darkening rear panel share a single rail, so one window can change character between a working morning and a sleeping night.
• Rails that travel apart. The upper and lower rails are driven independently, which lets the open band sit wherever the room needs it.
• Cells that hold still air. The creased honeycomb pocket traps a cushion of motionless air against the glass and slows heat exchange.
• No cord in the room. A push-pull mechanism replaces the cord loop, keeping the window clear and simple to handle.
• Cut to your opening. Each panel is produced to your own width and drop in our workshop and can be fitted inside the reveal or across the face of the wall.
